Blog
How to deal with marble polishing Mar 02, 2023

Marble is one of the most commonly used stones in the market at present. Marble stones can be seen in hotel decoration, shopping malls, squares and other places. Light-colored marble is more popular because of its pure, soft texture and elegant and natural veins. However, light-colored marble has a very fatal disadvantage, that is, the stone is easy to oxidize and turn yellow. Once the stone starts to oxidize and turn yellow, it will gradually lose its beauty. Therefore, hotels, shopping malls and other places should maintain a clean, tidy and aesthetic space. It is particularly important to do a good job in the daily renovation of stone materials.

  

How can marble be effectively refurbished and renovated?

1. If there is old wax on the ground, remove the wax as the first step 

TF 1517 single cleaning machine + V70E vacuum suction machine + black pad + wax remover

Prepare the waxing water in proportion and apply it evenly on the waxed floor with a mop, install the needle plate, fix the black pad, and wax the waxed floor. After removing the wax, use a water suction machine to absorb the wax stains, and scrape off the wax with a blade at the corners.

 

2. If the surface is severely corroded, repair it first

 

3. Grinding the marble surface

TF 1517P crystal surface machine + counterweight + 50#-3000# grinding disc + V70E vacuum suction machine

Use a crystal surface machine with 50# to 3000# grinding discs to continuously polish and polish from rough suction until the surface is seamless, flat and bright, and use a vacuum suction machine to suck up the sewage to prevent the sewage from polluting the ground for the second time.

 

4. Improve the hardness and gloss of the marble surface (add a protective layer)

TF 1517P crystal surface machine + red pad + V70E crystal powder + vacuum suction machine + steel wool pad

The crystal surface machine-installed red pad scouring pad and crystal powder grind and heat the marble, and then reach a certain temperature, so that the crystal powder crystallizes on the surface of the stone to form a protective layer. After completion, use a vacuum cleaner to dry the moisture and residue. Then use the crystal surface machine to install steel wool pads to maintain the ground.

Leave A Message

Leave A Message
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Home

Products

Contact

Solution